Clay Face Bricks · Masonry & Screen Blocks · Utility Bricks
23 Victoria Road, Kenwick, Perth WA · +61 449 989 159

Product Ranges

FACE BRICKS
Heritage Range Estate Range Renaissance Range Atelier — Heritage Matte Atelier — Heritage Tumbled Reclaimed Range Iberian Range — Slimline Iberian Range — Gloss
BLOCKS
Masonry Blocks Screen (Breeze) Blocks
UTILITY BRICKS
Utility Bricks & Lintels HP-Series Load-Bearing Blocks
PAVERS
Brickora Square Brickora Square Speckle Brickora Square Fleck Brickora Grand Square Brickora Plank Brickora Plank Speckle Brickora Plank Fleck Brickora Classic Brick Paver Brickora Heavy Duty Clay Paver Bullnose Edging
PAVERS

Brickora Square Fleck

Brickora Square Fleck

A contemporary square paver with a fine terrazzo-style fleck through the surface. The scattered aggregate creates a refined, designer look that lifts modern courtyards and entertaining areas.

Brickora Square Fleck
Format 200 × 200 mm • 60 mm
Specifications:
Format 200 × 200 mm
Thickness 60 mm
Pavers per m² approx. 25
Supplied In packs

COLOUR RANGE

Sky
Sky
Dew
Dew
Clay
Clay

For this fleck range we recommend a penetrating sealer only. All pavers shown sealed.

Product Specification

This specification sheet outlines the technical properties of the Brickora Square Pavers Range. The values stated represent average properties derived from the manufacturing process and are intended as a general guide for product selection and application.

Technical Specifications
Property Specification
Dimensional Category DP1
Shape Category Type C
Per Unit Weight 4.2 to 4.4 kg
Pavers Per Pack 270 to 275
Breaking Pressure > 6
Efflorescence Minimal to Mild
Slip Resistance Category P5
Standards & Compliance

Testing is conducted in accordance with the following Australian / New Zealand Standards where applicable or required.

  • AS/NZS 4456 — Masonry units, segmental pavers and flags — Methods of test.
  • AS/NZS 4586 — Slip resistance classification of new pedestrian surface materials.
Note: These technical facts represent average properties taken from the manufacturing process. AS/NZS 4456 and AS/NZS 4586 are applied where applicable or required. Actual product properties may vary within normal manufacturing tolerances.